Product Description

The main models include: 
GJS**-M2AX***-JX single fiber min: *2 fibers / max: *6 fibers 

Optional Rubber Block dia. 
For the big Ports: Rubber Optional 
*6 holes with dia. 7mm 
1 hole with dia *1mm 
2 holes with dia *0mm to *6mm (standard kit) 

For Small round port 
1 hole with dia 8mm to *2mm 
1 hole with dia. *2mm to *7.5mm 
4 holes with 5 mm to 7mm 
8 holes with 3mm*1 hole of 5mm (standard kit) 
2 holes with 5.5mm 

For Indoor/Outdoor Drop Cable used in small port. 
2 holes with 4.5*8.2mm 


One tray can accommodate up to *4 fiber splices; Per closure can accommodate up to 4 trays. 
The optic fiber splice closures are widely apply for the connecting of optical cable. 

The dome material mixed chemical agent to resist corrosion and aging and also provide ultra-violet protection. 
It can be installed in aerial locations, ducted applications, direct buried, manholes. Small volume but large capacity. 

1. Excessive fibers can be stored in storage baskets. Easy in fiber management. 
2. Fabricated by mixing the imported material and other chemical assistant agent(ageing resistance & ultraviolet radiation resistance), increase of service life 
3. Base-to-dome seals on FOSC are mechanical sealing ways for ease of installation and reentry. No other sealing adhesive tape is needed 
4. Base and dome sealed with clamp and O-ring system 
5. The splice trays are hinged for access to any splice without disturbing others trays. 
6. The inner parts and fixing parts are made of stainless steel 
7. FOSC with a earthing device protect it from damage by lightning 
8. Compatible with most cable types(single fiber or ribbon), and cable constructions(loose tube, central core, slotted core, modular). And the product can be used in any environment (aerial, buried, handhole, manhole)and in many applications(tap-off, expressed, branch, and repair) 
9. No special tools are needed to open the closure, and it can be opened and used repeatedly. 


Technical Parameter: 

1. Working Temperature: **0 degrees centigrade~**0 degrees centigrade 
2. Atmospheric Pressure: *0~**0Kpa 
3. Axial Tension: >***0N/1min 
4. Stretching Resistance: ***0N/*0 square centimetre(1min) 
5. Insulation resistance: >2***4MΩ 
6. Voltage Strength: *5KV/1min, no arcover or breakdown 
7. Pressure in the water: *0m/*2hours 
8. Splice tray with optical taking-in radius≥ *0mm. Low optical loss.